Most people pick a shop size by looking at a number, then find out how small it feels once the trucks are inside. Here is what each of our four most asked-about sizes holds in real life. The vehicle sizes are rough, so measure your own equipment before you decide.
How to read the numbers
A 30x40 shop is 30 feet wide and 40 feet long, which makes 1,200 square feet of floor. A 40x60 is 2,400 square feet, a 50x80 is 4,000 and a 60x100 is 6,000. The floor area doubles from a 30x40 to a 40x60, which is why one step up in size feels like a much bigger building.
Remember that wall space is not floor space. Workbenches, shelving, a compressor and a wood stove all take room along the walls, so the clear floor you can drive and turn on is always smaller than the total.
30x40: a tidy single-purpose shop
At 1,200 square feet, a 30x40 fits two vehicles, or one truck and a small workbench area. It works well as a home garage with a bit of workspace, a hobby shop or a place for a side-by-side and a few tools. A full-size crew cab truck is around 20 feet long, so two trucks nose to tail use up most of the 40-foot length. Park two trucks and a quad and the room to work is gone, which is the usual complaint about this size. See our hobby workshop page for how people lay it out.
40x60: the size most people choose
At 2,400 square feet, a 40x60 is our most popular size for good reason. You can park vehicles along one side and keep a full workshop along the other, with room to walk between them. Two or three vehicles, a work area with benches and a welder, and a lane down the middle is a comfortable fit. For an acreage shop it is usually the sweet spot. You can start a design at this size in the 3D designer.
50x80: room for equipment and a work area
At 4,000 square feet, a 50x80 gives you a different kind of shop. A mid-size tractor with an implement, a truck and a separate heated work area can share the building. With 50 feet of width you can park a larger machine and still walk around it, and the extra length lets you put a drive-through lane between two doors. It suits a small farm, or a business that works out of the shop. Open the 50x80 in the designer.
60x100: a working building
At 6,000 square feet, a 60x100 is a working building rather than a garage. It can hold a combine or a seeder with room around it, several bays, and a maintenance area, or serve as a yard building for a contractor. At this width and length, the frame type matters: a wide clear span with no posts in the way is easier to get with steel or post frame, and our frame type comparison shows the trade-offs. See the 60x100 in the designer.
Height and doors matter as much as the footprint
A shop that is the right size on the floor can still be wrong if the doors are too small. Modern tractors and sprayers are tall, and a door that is a foot too short is a daily annoyance. Our farm shops are commonly built with 14 or 16 foot walls and overhead doors such as 16x14 or 16x16, so the equipment you own sets the door size, and the door size sets the wall height. Write down your tallest and widest machine before you start.
A simple way to choose
List everything you want inside: vehicles, equipment, benches, storage and anything you might buy in the next five years. Then draw each item as a rectangle on graph paper and fit them into the floor. Leave at least a few feet around each item so a door can open and a person can pass. Most owners who go through this end up choosing the next size up. Our sizes run from 30x30 up to 80x120, and custom sizes are available on request, so there is no need to squeeze into a standard footprint.
Ready to see it? Design your shop free in 3D, or book a free call and we will go through your list with you.
Common questions
How many vehicles fit in a 30x40 shop?
A 30x40 is 1,200 square feet. It fits two vehicles, or one truck with a small work area. It gets tight quickly if you add a quad or a trailer.
What size shop do most people build?
The 40x60 is our most popular size. It gives you 2,400 square feet, enough for vehicle parking on one side and a full workshop on the other.
Can a tractor fit in a 50x80 shop?
A mid-size tractor with an implement, a truck and a work area can share a 50x80, which is 4,000 square feet. Check the height of your machine against the overhead door size.
Can I build a size that is not on your list?
Yes. We build from 30x30 up to 80x120, and custom sizes are available on request.
