Can you build a shop in a Manitoba winter? Partly, yes, and planning through the cold months is the smartest way to be ready for spring. Here is what we can say from how we build.
Posts can go in the ground in winter
Winter does not stop a post frame build from getting started. Posts go in the ground in winter, and we have put shops up through the snow (see the winter build in our projects gallery). You do not have to wait for the snow to melt before you plan.
Concrete is the weather-sensitive part
Rain delays a pour and extreme cold affects how concrete cures, so the slab is the step that depends most on the weather. A typical slab takes about a week including cure time before the building goes up. Frost reaches 4 to 5 feet down on the prairies, which is why every pad we pour has frost walls below the frost line. See why your concrete pad matters for the details. If you want in-floor heat, the PEX has to be laid before the pour, so decide on it early.
Use the cold months for the paperwork
Between the permit, the drawings and the material order, a lot has to happen before a shop can go up. Permit approval usually takes 2 to 6 weeks, and kit orders ship within 2 to 4 weeks of the deposit. Starting in January or February for a summer build is ideal, and spring and summer book up fast on the prairies. Our permits and timelines guide covers what to have ready.
Winter Lock-In
We run a Winter Lock-In offer for people who want to book in winter and build in spring. Your drawings get started right away, and the offer page lays out the deposit, the payment steps and the deadline. See the Winter Lock-In page for the current details.
Plan the shop for winter use
If you will work in the shop through a Manitoba winter, plan for it from the start. Our complete kit packages include R22 wall insulation, R50 ceiling insulation, a vapour barrier and an interior metal liner, and in-floor heat is the upgrade we recommend most for a prairie shop. For a heated shop, the stud frame is the most practical choice for most people. To start a design, use the 3D designer or call (204) 998-5838.
For the order things happen in, see how a shop build goes, step by step.
